Manual de Montagem do Eletroduto Metálico Flexível (IP-66) Reusável
1. Cut the corrugate at the bottom of the link, using a tool that does not damage the surface of the plate. Ex.: Manual pipe cutter. ![]() |
2. Insert the mouting joint in the corrugated. ![]() |
3. Position the mouting ring in the 1st (first) channel from the face of the corrugated. And close with the aid of pliers. ![]() |
4. Fit the sealing washer to the face of the corrugate. ![]() |
5. Assemble/ screw the male / male ou female / male adapter in the equipament connection, according to the project's specialization. ![]() |
6. Mount / screw the male end of the adapter into the Mounting Union and tighten until the corrugated links are fully compressed between the mounting ring and the sealing washer. Recommended maximum tightening torque 30 N.m |